Professional electrical services across Bristol and the surrounding areas. We provide reliable domestic and commercial electrical installations, inspections, testing, maintenance and repairs.

Contacts

Bristol

info@kebbi-electrical.co.uk

07943 951993

How to Tell If Your Electrics Are Safe

By Azzeddine Kebbi, NAPIT-registered electrician and director of Kebbi Electrical Services · Updated undefined

undefined

NAPIT registeredWinner Quality Business Awards 2025 & 2026Tested & certified

Warning signs to look out for

Some electrical problems are obvious; others are hidden. Watch out for: flickering or dimming lights (can indicate a loose connection or overloaded circuit); burning or fishy smells from sockets, switches, or the fuse board (a sign of overheating — turn off at the mains and call an electrician immediately); discoloured or warm sockets or switches; sparks when plugging in an appliance; circuit breakers that trip frequently; and sockets or switches that feel loose in the wall.

Signs your wiring may be old or outdated

Older wiring is not automatically dangerous, but it may no longer meet current safety standards. Signs your wiring could be old include: round-pin sockets (pre-1960s); fabric or rubber-covered cables visible in the loft or under the floor; a fuse board with rewireable fuses rather than modern circuit breakers; wiring that has not been inspected in over 10 years; and a lack of RCD protection in the consumer unit. An EICR inspection will give you a full picture.

What to do if you suspect a problem

If you notice any of the warning signs above, do not ignore them. For urgent symptoms — burning smells, sparks, discoloured sockets — switch off at the mains and call a registered electrician. For non-urgent concerns, book an EICR (Electrical Installation Condition Report). This is a formal inspection carried out by a registered electrician that tests every circuit and reports on its condition, giving a verdict of Satisfactory, Improvement Recommended, or Improvement Required.

Common questions

What are the signs of dangerous electrics?

Key warning signs include: burning or fishy smells from sockets, switches, or the consumer unit; discoloured or warm switch and socket plates; sparks when plugging in appliances; flickering or dimming lights with no obvious cause; circuit breakers that trip repeatedly; and sockets that feel loose or wobbly in the wall.

How often should electrics be inspected?

The recommended interval for a domestic property is every 10 years, or when you buy a home. For a rented property, landlords are legally required to have an EICR every 5 years or at the start of each new tenancy. If you are unsure when your property was last inspected, booking one is worthwhile — the peace of mind is worth more than the cost.

What is an EICR?

An EICR (Electrical Installation Condition Report) is a formal inspection of your home's fixed electrical installation, carried out by a registered electrician. It tests every circuit and assigns a code — C1 (danger present), C2 (potentially dangerous), C3 (improvement recommended), or FI (further investigation needed). C1 and C2 codes require remedial work before the installation can be certified as satisfactory.

Is it dangerous to have old wiring in my house?

Old wiring is not automatically dangerous, but it may lack the protection required by current standards — particularly RCD protection, which can prevent fatal electrocution. Older wiring is also more prone to insulation deterioration. An EICR will tell you whether your wiring meets current standards and what, if anything, needs updating.

Can I check my own electrics?

You can carry out a basic visual check — looking for discoloured sockets, damaged cables, loose fittings, and old-style fuses. But a proper assessment of electrical safety requires testing equipment and expertise. Only a registered electrician can carry out an EICR and issue a certificate confirming your installation is safe.

What should I do if I smell burning from a socket?

Switch off at the mains immediately and do not use the socket until it has been checked by a registered electrician. A burning smell from a socket indicates overheating, which can be caused by a faulty appliance, a loose connection inside the socket, or a wiring fault. Do not ignore it — overheating sockets are a leading cause of house fires.

undefined

undefined