Professional electrical services across Bristol and the surrounding areas. We provide reliable domestic and commercial electrical installations, inspections, testing, maintenance and repairs.

Contacts

Bristol

info@kebbi-electrical.co.uk

07943 951993

Circuit Breaker Keeps Tripping: Causes and What to Do

By Azzeddine Kebbi, NAPIT-registered electrician and director of Kebbi Electrical Services · Updated undefined

undefined

NAPIT registeredWinner Quality Business Awards 2025 & 2026Tested & certified

Why circuit breakers trip

A circuit breaker trips automatically when it detects one of three problems: an overload (too many appliances drawing more current than the circuit is rated for), a short circuit (a live wire touching a neutral wire, causing a sudden surge of current), or a ground fault (current leaking to earth, usually detected by an RCD rather than a standard breaker). Each type of trip has different symptoms and different fixes.

Overloaded circuit

An overloaded circuit is the most common cause. If your breaker trips when you plug in or switch on a particular appliance, you are probably drawing too much power for that circuit. The fix is simple: unplug some appliances and spread the load across different circuits. If the problem keeps happening, the circuit may need upgrading — a job for a registered electrician.

Faulty appliance

If the breaker trips as soon as a specific appliance is switched on, the appliance itself is likely faulty. Disconnect it and test the circuit without it. If the breaker stops tripping, have the appliance repaired or replaced. Never keep using an appliance that causes a trip — it is a sign of an internal fault that could cause a fire.

Wiring fault

If the breaker trips with no obvious cause, or immediately when it is reset, there may be a wiring fault — a damaged cable, a loose connection, or moisture in a socket or fitting. This is not a DIY fix. Switch off the affected circuit and call a registered electrician. A wiring fault that is left unattended is a serious fire and shock risk.

Common questions

Why does my circuit breaker keep tripping with nothing plugged in?

If the breaker trips even when nothing is plugged in, the problem is likely in the fixed wiring itself — a damaged cable, a faulty socket or light fitting, or moisture getting into an outdoor fitting. This is a wiring fault and needs a registered electrician to diagnose and repair safely.

Is it safe to keep resetting a tripping circuit breaker?

No. A circuit breaker trips to protect your home. If it keeps tripping after you reset it, there is an underlying fault. Repeatedly resetting it without fixing the cause risks overheating the wiring and can cause a fire. Identify the cause first — if you cannot, call an electrician.

Can a faulty appliance trip a circuit breaker?

Yes. A faulty appliance with an internal short circuit or earth fault will trip the circuit breaker or RCD the moment it is switched on. Unplug all appliances from the affected circuit, reset the breaker, then plug them back in one at a time to identify which one is causing the trip.

What is the difference between a circuit breaker and an RCD?

A circuit breaker (MCB) protects against overloads and short circuits. An RCD (residual current device) protects against earth faults — current leaking to ground, which is the type of fault most likely to cause electrocution. Modern consumer units have both. If your RCD trips, it may indicate a faulty appliance or a wiring fault to earth.

How do I reset a tripped circuit breaker?

First, switch off or unplug appliances on the affected circuit. Then push the breaker switch firmly to the off position (some need to go fully off before they will go back on), then push it to the on position. If it immediately trips again, do not keep resetting it — there is an active fault that needs investigation.

Can a circuit breaker wear out?

Yes. Circuit breakers have a finite number of trips before they can become unreliable. A breaker that trips at loads well below its rating, or one that is over 20–25 years old, may need replacing. This is a job for a registered electrician — it involves working in the consumer unit, which is notifiable work under Building Regulations.

undefined

undefined