Outdoor Lighting Installation: What You Need to Know
By Azzeddine Kebbi, NAPIT-registered electrician and director of Kebbi Electrical Services · Updated 2025-01-15
Outdoor lighting makes your home safer and more secure. But installing outdoors means weatherproofing, correct cable, and UK building regulations. Here is what you need to know.
Do you need an electrician for outdoor lighting?
IP ratings explained
What cable should be used outside?
RCD protection is mandatory
Solar vs mains-powered outdoor lights
Outdoor lighting installation costs in Bristol
Common questions
Can I wire outdoor lights myself?
You can replace a like-for-like fitting yourself. Any new circuit or new cable run outdoors must be done by a Part P registered electrician under UK building regulations.
What IP rating do I need for outdoor lights?
IP44 is the minimum for most outdoor positions. IP65 or higher is recommended for exposed locations, near water features, or ground-level fittings.
How deep do outdoor electrical cables need to be buried?
SWA cable must be buried at least 450mm deep under protected areas such as paving or decking, and 600mm under open garden.
Do outdoor lights need their own circuit?
Not always, but all outdoor circuits must have 30mA RCD protection. An electrician will assess whether your existing board can protect the new circuit.
Related guides
Outdoor sockets: what you need to know
RCD protection, weatherproof enclosures and the right circuit for outdoor sockets.
Fire-rated downlights: do you need them?
When you need fire-rated downlights and what the ratings mean.
Can I Do My Own Electrics?
Which electrical jobs you can do yourself and when you need a registered electrician.
Consumer Unit Replacement Cost
What it costs to replace a consumer unit and what should be included.
