Professional electrical services across Bristol and the surrounding areas. We provide reliable domestic and commercial electrical installations, inspections, testing, maintenance and repairs.

Contacts

Bristol

info@kebbi-electrical.co.uk

07943 951993

Washing machine, oven or boiler tripping the electrics?

By Azzeddine Kebbi, NAPIT-registered electrician and director of Kebbi Electrical Services · Updated 11 November 2026

If the power trips every time you use one appliance, that appliance almost certainly has a fault. In washing machines, ovens, dishwashers and kettles the usual cause is a heating element that has started leaking current to earth, which your RCD detects and switches off.

NAPIT registeredWinner Quality Business Awards 2025 & 2026Tested & certified

How to confirm it is the appliance

  1. Unplug the appliance and reset the switch. If it stays on, the appliance is the likely cause.
  2. Note when it trips: straight away, or part-way through a cycle when the heater comes on.
  3. Check the plug and cable for damage, scorch marks or a loose fit.
  4. Do not keep resetting and retrying. Each trip is the safety device doing its job.

Usual causes by appliance

Washing machine or dishwasher

A failed heating element, water leaking onto electrics, or a worn motor.

Oven or cooker

A failing element, often tripping a few minutes after it heats up.

Boiler

Water getting into the electrics, or a failing pump or fan. Needs a Gas Safe engineer.

Kettle, iron or toaster

A failed element or damp inside. Replace the appliance.

When it is the wiring, not the appliance

  • It trips with nothing plugged in.
  • Several different appliances trip the same circuit.
  • It trips in wet weather, which points to outdoor sockets or lights.

That needs testing by an electrician. See why an RCD keeps tripping.

Common questions

Why does my washing machine keep tripping the electrics?

Most often the heating element has failed and is leaking current to earth. Water leaks inside the machine and a worn motor are the other common causes.

Why does my oven trip the electrics when it heats up?

An ageing element can break down as it gets hot and leak current to earth, tripping the RCD. The element needs replacing.

Is it the RCD or the breaker that tripped?

An RCD trips on earth leakage, usually a faulty appliance or damp. A breaker (MCB) trips on overload or short circuit. See what is an MCB.

Can a faulty appliance damage my electrics?

The trip protects the wiring. But a faulty appliance can overheat its plug or socket, so stop using it until it is repaired.

Still tripping with everything unplugged?

See our electrical installations and repairs, or for urgent faults our emergency electrician service.